Description
PRM NP Vacuum Pump With Motor for Vapor Recovery System
The PRM NP Vacuum Pump is a motor-driven vapor recovery component designed for gasoline fuel dispensers and petrol station vapor recovery systems. It supports the vapor return process during refueling by creating the vacuum required for a compatible Stage II vapor recovery circuit.
As a manufacturer of vapor recovery equipment and fuel dispenser accessories, PRM supplies the NP Vacuum Pump for system integrators, fuel dispenser manufacturers, station maintenance companies and aftermarket replacement projects. The pump is supplied with a motor for a more convenient equipment-matching solution.
Product Introduction
Gasoline vapors are generated during vehicle refueling. A properly matched vapor recovery system helps guide these vapors back through the recovery circuit rather than allowing unnecessary vapor release at the dispensing point.
The PRM NP Vacuum Pump is installed as part of a compatible fuel dispenser vapor recovery system. During dispensing, the motor-driven pump supports the movement of vapor-air mixture through the designated recovery path. It is intended for equipment builders and service teams that need a compact vapor recovery pump solution for gasoline dispenser projects.
This NP Vacuum Pump is not a gasoline transfer pump. It is designed for vapor recovery duty and must be matched with the correct fuel dispenser, controller, vapor hose, nozzle and installation arrangement.
Product Parameters
|
Item |
Specification |
|
Brand |
PRM |
|
Product name |
NP Vacuum Pump With Motor |
|
Product type |
Motor-driven vapor recovery vacuum pump |
|
Main application |
Gasoline fuel dispenser vapor recovery system |
|
Installation position |
Inside or alongside a compatible fuel dispenser |
|
Working medium |
Gasoline vapor-air mixture |
|
Motor configuration |
With motor |
|
Vapor recovery stage |
Compatible Stage II system application |
|
Voltage |
Confirm according to final ordered configuration |
|
Frequency |
Confirm according to destination-market requirement |
|
Flow rate |
Confirm according to final NP pump data sheet |
|
Maximum vacuum |
Confirm according to final NP pump data sheet |
|
Explosion-proof grade |
Confirm according to actual certificate |
|
Connection size |
Confirm according to dispenser and vapor hose design |
Key Features
Motor-integrated supply
The NP Vacuum Pump is supplied with a motor, helping equipment manufacturers and maintenance teams source a matched pump-and-motor assembly.
Designed for vapor recovery duty
This product is intended for fuel dispenser vapor recovery systems, where it supports the return path for gasoline vapor during vehicle refueling.
Fuel dispenser system integration
The pump can be matched with compatible vapor recovery nozzles, coaxial hoses, separators, breakaway valves and dispenser control systems.
Compact equipment solution
Its application focus is petrol station equipment, helping system builders integrate vapor recovery functionality into dispenser projects.
Suitable for replacement projects
The NP Vacuum Pump can be evaluated for new installations, maintenance programs and replacement of existing vapor recovery pump assemblies.
Applications
The PRM NP Vacuum Pump is suitable for:
Product Details
Motor assembly
The motor-driven configuration is designed to provide the power source required by the vapor recovery pump assembly. Confirm voltage, frequency and wiring requirements before ordering.
Vapor inlet and outlet connection
The pump must be connected to the correct vapor recovery piping. Hose diameter, fittings and installation direction should follow the dispenser system drawing.
Dispenser control matching
The pump should be matched with the dispenser control logic so that vapor recovery operates together with the fueling process.
System-level compatibility
For reliable performance, confirm the complete arrangement: vapor recovery nozzle, hose, separator, pump, controller, piping and underground tank vapor return connection.
Installation and Maintenance
Install the NP Vacuum Pump only in a compatible gasoline dispenser vapor recovery system. Before installation, verify the mounting position, electrical supply, control signal, vapor hose routing and connection sizes.
Keep the pump body and connection points clean. Inspect vapor hoses, electrical terminals and mounting hardware regularly. Stop operation and arrange inspection if abnormal vibration, noise, odor, leakage or unstable vapor recovery performance is detected.
Installation, wiring and commissioning should be completed by qualified fuel station equipment personnel and in accordance with local safety requirements.
Quality and Procurement Support
PRM can discuss product configuration, matching requirements, packaging and OEM identification before order confirmation. For a quotation or technical selection, provide the fuel dispenser brand, required voltage, vapor recovery hose specification, installation drawing, annual quantity and destination market.
Request the final NP Pump technical data sheet, wiring diagram, dimensional drawing and applicable certification documents before the product page displays numerical performance or certification claims.
FAQ
Is the NP Vacuum Pump used to transfer gasoline?
No. It is a vapor recovery vacuum pump for gasoline fuel dispenser systems, not a liquid fuel transfer pump.
Can it be installed on any fuel dispenser?
Compatibility must be checked against the dispenser layout, controller, voltage, vapor hose connection and vapor recovery configuration.
Does the product include a motor?
Yes. This page is for the PRM NP Vacuum Pump With Motor version.
Which details are needed before ordering?
Please confirm voltage, frequency, pump flow requirement, vacuum requirement, mounting size, connection type, control signal and required certificates.
Can PRM support OEM projects?
Yes. OEM labeling, packaging and system-matching requirements can be discussed before production.
